Stereo RCA to Beolab 4/ 4PC - Variable level Line outputs only

Stereo RCA to B&O Beolab 4 and Beolab 4PC cable

Connect a Non-B&O music system to the Beolab 4 and 4PC "pyramid" speakers

This product is a high quality cable to allow you to connect a device with a stereo RCA output directly to your Beolab 4 or Beolab 4PC (ICEPower) active loudspeakers. NOTE: the output sockets must be Variable volume outputs and not fixed-level Line! Please see our "Minijack to Beolab 4" cables as an alternative.

One cable will allow a pair of Beolab 4 speakers to be connected to a device. This cable will fit the Beolab 4 and Beolab 4PC active louspeakers (ie. those with 3.5mm minijack line input sockets) - if you are in any doubt, please ask!  Each cable is supplied as a pair, with two plugs at the speaker end (ie. one plug goes to each speaker).  The two sides of the cable can be easily split apart to let you place the speakers as far apart as you need (for example with the 3m cable, you can place the speakers up to 6m apart with the music source in the middle).

Simply set the input switch on the back of your Beolab speakers to "Line" and plug the cable into the small Line socket on the back of each speaker. Turn the volume down on the input device when you switch it on, as Beolab speakers are VERY powerful!

• Screened Pure-Crystal Oxygen-Free Copper cable with Sounds Heavenly signature Blue sheath
• Signal conductors (x 2): 7 x 0.2mm PC-OFC copper
• Screening conductor: 16 x 0.12mm PC-OFC copper
• Shielding: Foil screen to reduce interference
• Neutrik/Rean metal-bodied 7-pin DIN plug with gold plated pinss
• Digital 24 carat Gold-Plated metal-bodied 3.5mm stereo jack plug