- -16.66%
AV Processor / Pre-amp / Sonos to BeoLab (using the Powerlink DIN sockets) one cable for two speakers
£22.99
Connect an AV processor or Pre-amp directly to your B&O BeoLab active speakers! One cable connects two speakers to a pre-amp or AV receiver with RCA pre-out sockets fitted.
NOT FOR 1, 2, 4, 5, 7-x, 10, 11, 2500, 4000 MK.1, 3000, 4500, 5000, 6000, 8000 OR PENTA SPEAKERS!
Delivery Options
We ship to UK and Europe only, with free UK shipping available. Sorry we cannot ship outside Europe.
Secure Payments
Shop with confidence at Sounds Heavenly. Pay safely by card or PayPal in our secure site.
European Customers
Your local postal service may also charge Customs fees if you are outside UK. Contact us for details
Variable volume Line output to Beolab Line In (Powerlink compatible) cables
Connect an AV processor or Pre-amp (or Sonos Connect) directly to your B&O Beolab active speakers
*****
IMPORTANT NOTE: THIS CABLE IS NOT SUITABLE FOR 1, 2, 4, 5, 7-x, 10, 11, 2500, 4000 MK.1, 3000, 4500, 5000, 6000, 8000 OR PENTA SPEAKERS - PLEASE DO NOT BUY THIS CABLE IF YOU HAVE THESE SPEAKERS!
PLEASE ASK US FOR ADVICE AND WE CAN FIND YOU THE CORRECT CABLE TO USE INSTEAD.
*****
This product is a professional quality stereo Twin RCA to "Powerlink Line-In" cable to allow you to connect from an AV processor or pre-amplifier with variable volume pre-out sockets directly to your B&O Beolab active speakers. One cable will connect two speakers to your music player or receiver. Each cable is supplied as a pair, with two plugs at the speaker end (ie. one plug goes to each speaker). The two sides of the cable can be easily split apart to let you place the speakers as far apart as you need (for example with the 3m cable, you can place the speakers up to 6m apart with the music source in the middle).
Important note: This cable is for connection from AV processors and pre-amplifiers only! Other devices generally use Fixed level Line out - this cable is only suitable for variable/ volume adjustable outputs. If you are trying to connect from a different device such as a TV or receiver please see our "Minijack to BeoLab cable" linked in the related items panel. Alternatively if you wish to connect Beolab speakers to an integrated amplifier or power amplifier, please use our "Attenuator kit" to avoid damaging the speakers. If you are in any doubt, please ask!
Compatibility
This cable is suitable for the following range of Bang and Olufsen Beolab active loudspeakers:
- Beolab 3
- Beolab 4000 mark 2
- Beolab 6002
- Beolab 8002
- Beolab 9
- Beolab 12 (12-1 / 12-2 / 12-3) -- Please note, clip-on RJ45-PL compatible adapters required!
Please note that this cable is NOT suitable for speakers that do not have a Line input option, eg. Beolab 2500 / 2 / 7 and 10! Instead see our "Powered Trigger Kit" for a solution for these speakers.
Cable specifications:
- Double-Screened, Pure-Crystal Oxygen-Free Copper cable with Sounds Heavenly signature Blue sheath
- Signal conductors (x 2): 7 x 0.2mm PC-OFC copper
- Screening conductors (x2): 16 x 0.12mm PC-OFC copper
- 2 x RCA plugs, 24 carat Gold-Plated pins, metal-bodied plugs
- 2 x 7 pin DIN "Powerlink" compatible plugs, Neutrik/Rean, gold-plated pins
One of these cables will connect two speakers.
Did you know?
We have many variations of cable for B&O BeoLab speakers allowing you to connect them to almost anything you want! Browse our entire range to find what you are looking for.
(M) 2rca/2x7pd
Specific References
Connect an AV processor or Pre-amp directly to your B&O BeoLab active speakers! One cable connects two speakers to a pre-amp or AV receiver with RCA pre-out sockets fitted.
NOT FOR 1, 2, 4, 5, 7-x, 10, 11, 2500, 4000 MK.1, 3000, 4500, 5000, 6000, 8000 OR PENTA SPEAKERS!