Single/Twin RCA to Beolab 2, 7, 8, 10, 28 and 2500 - Powered Trigger Kit

Twin RCA to Beolab 2, 7, 8, 10, 28 or 2500 - Powered Trigger Kit

Use a B&O centre speaker or subwoofer with your non-B&O pre-amp, surround sound receiver or AV processor!

Want to use a B&O Beolab centre speaker with your non-B&O system? Or plug your surround sound receiver directly into a Beolab 2 subwoofer? Many B&O stores will tell you that you cannot do this - but our Powered Trigger Kit makes this situation possible!

Important note: This cable is for connection from Variable level outputs found on AV processors, pre-amplifiers, and surround receivers only! Other devices generally use Fixed level Line out - this cable is only suitable for variable/ volume adjustable outputs. If you are trying to connect from a different device such as a TV or stereo hifi please see the Minijack version of this kit. Alternatively if you wish to connect BeoLab speakers to the speaker outputs of an integrated amplifier or power amp, please use our "Attenuator kit" to avoid damaging the speakers. If you are in any doubt, please ask!

• Beolab 2 Subwoofer (extra cables are required if you wish to use Beolab 2 with other Beolab speakers, see notes below)
• Beolab 7-1 Centre Speaker
• Beolab 7-2 Centre Speaker
• Beolab 7-4 Centre Speaker
• Beolab 7-6 Centre Speaker
• Beolab 8 Speakers (extra cables are also required, see notes below)
• Beolab 10 Centre Speaker
• Beolab 28 Speakers (extra cables are also required, see notes below)
• Beolab 2500 (extra cables are also required, see notes below)

BEOLAB 2 subwoofer - To use this kit with a Beolab 2 and a set of full-range Beolab speakers, you will also require additional Powerlink mk 3 cables (to connect the extra speakers to the output sockets on the Beolab 2). These items are NOT included with this kit but are available to purchase in our store.

BEOLAB 8 - To use this kit with a pair of Beolab 8 speakers you will also require an additional RJ45 to Powerlink Splitter plus a Powerlink to RJ45 cable to connect the second speaker. These items are NOT included with this kit but are available to purchase in our store.  This kit allows the speakers to connect to a non-B&O source via their RJ45 Powerlink inputs, as the USB-C Line inputs have an audio delay that makes them unsuitable for use with a video source.  Please ask for advice if you are unsure.

BEOLAB 28 - To use this kit with a pair of Beolab 28 speakers you will also require an additional RJ45 to Powerlink Splitter plus a Powerlink to RJ45 cable to connect the second speaker, as well as a Powerlink Splitter and a Speaker Sense Adapter to ensure the speakers come out of Powerlink mode when the trigger is switched off. These items are NOT included with this kit but are available to purchase in our store.  This kit allows the speakers to connect to a non-B&O source via their RJ45 Powerlink inputs, as the 3.5mm Line inputs have an audio delay that makes them unsuitable for use with a video source.  Please ask for advice if you are unsure.

BEOLAB 2500 - To use this kit with a pair of Beolab 2500 speakers you will also require an additional Powerlink Splitter plus a Powerlink mk 3 cable to connect the second speaker. These items are NOT included with this kit but are available to purchase in our store.  Please ask for advice if you are unsure.

What about electrical noise? Each power supply is fully tested before shipping to ensure that it operates perfectly and is totally silent in use (some other power supplies will generate noise that can be heard through the speakers - our high quality products do not do this!). The DIN plug used on this cable also includes a voltage reference pin to prevent mains interference occuring.

Kit specifications:

• Double-Screened, Pure-Crystal Oxygen-Free Copper audio cable with Sounds Heavenly signature Blue sheath
• Signal and screening conductors: 7 x 0.2mm PC-OFC copper
• Neutrik/Rean metal-cased 5-pin DIN plug with gold plated pins
• Gold-Plated metal-bodied RCA/Phono plugs
• 110-240 volt AC mains power supply on 1.5m black cable with mains plug
• Power supply is CEC Compliant, with GS, CB and CE safety ratings
• Optional clip-on power adapter plug for use in UK and Europe

• *A high quality switching 110-240 volt AC mains power supply with a choice of interchangeable UK and European plugs will be provided. The power supply provided with this cable can accept a wide range of AC voltages from 110 to 240 volts AC, making it suitable for most countries. If you are in any doubt about its suitability for your country, please email us for advice before making your purchase.

One kit will allow one Beolab speaker to be connected as standard - contact us for advice on splitting this signal to multiple speakers!