5 pin DIN to 4 x RCA - Input and Output cable for B&O, Naim, Quad
Integrate your B&O, Naim or Quad system into a conventional Hifi or Home Cinema installation!
This 1m long cable gives both inputs and outputs via the Tape or Aux socket on a B&O, Naim or Quad audio system via four RCA/phono plugs.
Shop with confidence at Sounds Heavenly. Pay safely by card or PayPal in our secure site.
Free UK shipping. Tracked services available. Worldwide shipping - click here for more information.
Your local postal service may also charge Customs fees if you are outside UK. Contact us for details
Integrate your B&O, Naim or Quad system with this combined input and output cable!
This cable has a 5 pin DIN plug and 4 x RCA/phono plugs to provide both input and output connection via one cable.
This 1m long cable will fit almost all B&O, Naim and Quad audio systems with 5 pin or 7 pin DIN Tape or Aux sockets - if you are in any doubt, please ask!
- Twin Screened Pure-Crystal Oxygen-Free Copper cable with grey sheath
- Signal conductors (x 4): 7 x 0.1mm PC-OFC copper
- Screening conductors (x 4): 16 x 0.1mm PC-OFC copper
- 5-pin DIN plug with gold plated pins
- 4 x RCA plugs with gold contacts
Our 5 pin DIN cables will fit and work perfectly in the 7 pin DIN Aux and Tape sockets on B&O systems. The extra two pins are only used for remote control data to other B&O products, so they are spare in this application. Additionally, using 5 pin DIN plugs allows the cables to also fit pre-1986 B&O products (which used five pin DIN sockets).
Important note: This cable should not be used to connect to B&O speakers, it is intended only when connecting a B&O system to other brands of amplifiers.