Sounds Heavenly
Hand built Powerlink mk 3 compatible upgrade cable with 5 cores wired, high performance
Hand built Powerlink mk 3 compatible upgrade cable with 5 cores wired, high performance
Couldn't load pickup availability
Hand built Powerlink Mark 3 compatible upgrade cable for Bang and Olufsen - High performance cable
Get the best sound from your Beolab speakers - hand built in our UK workshop!
Our high quality Powerlink mk 3 compatible upgrade cable allows you to connect Beolab active loudspeakers (all models except Beolab 5, 50 and 90) to your Bang and Olufsen hifi system or television.
This cable has 7 pin DIN Powerlink compatible shielded metal plugs with gold pins fitted and will fit almost all B&O audio systems and TV's manufactured since 1990 (any with Powerlink output sockets) - if you are in any doubt, please ask!
Available in black. For Beolab 5, 50 and 90 speakers, please see our Powerlink mk 2 compatible cable instead.
Compatibility - This cable is suitable for most of the range of Bang and Olufsen Beolab active loudspeakers and most past models, including:
- Beolab 1
- Beolab 2 Subwoofer
- Beolab 3
- Beolab 4
- Beolab 7.1 Centre Speaker
- Beolab 7.2 Centre Speaker
- Beolab 7.4 Centre Speaker
- Beolab 7.6 Centre Speaker
- Beolab 8 (via RJ45 adapter, not included)
- Beolab 9
- Beolab 10 Centre Speaker
- Beolab 11 Subwoofer
- Beolab 12-1, 12-2, 12-3 (via RJ45 adapter, not included)
- Beolab 14 (via RJ45 adapter, not included)
- Beolab 17 (via RJ45 adapter, not included)
- Beolab 18 (via RJ45 adapter, not included)
- Beolab 19 (via RJ45 adapter, not included)
- Beolab 20 (via RJ45 adapter, not included)
- Beolab 28 (via RJ45 adapter, not included)
- Beolab 2500
- Beolab 3000 (displays will not light)
- Beolab 4000
- Beolab 4500 (displays will not light)
- Beolab 5000 (displays will not light)
- Beolab 6000
- Beolab 6002
- Beolab 8000
- Beolab 8002
- Beolab Penta mk.2/mk.3 (displays will not light)
- Beolink Passive/MCL2P
This cable is perfect for use with all Beolab speakers except Beolab 5, 50 and 90 - these need mk 2 cables).
This cable works with Beolab speakers with a built-in display but the displays will not light. If you need the displays to light, perhaps our Powerlink mk 2 compatible cable would suit you better. The mk 2 cable has extra cores wired for older Beolabs - ideal for those with displays.
Cable specifications:
- Screened High-Purity Copper cable with Black sheath, 4.5mm diameter
- Audio and Signal conductors: 7 x 0.11mm stranded oxygen free copper
- Screening conductor: 104 x 0.11mm stranded oxygen free copper
- Metal plastic cased 7-pin DIN plugs with gold pins
- "Speaker On" and "Voltage Reference" signal wires connected
- For use with all Beolab loudspeakers except Beolab 5, 50 and 90
