• -16.66%
Stereo RCA to Beolab 4/ 4PC - Variable level Line outputs only
  • Stereo RCA to Beolab 4/ 4PC - Variable level Line outputs only

Stereo RCA to Beolab 4/ 4PC - Variable level Line outputs only

CHF22.86

Connect a Non-B&O music system with a stereo RCA output to the Beolab 4 and 4PC "pyramid" speakers. Suitable for variable level "pre-out" RCA sockets only.

Cable Length in metres
Quantity
In Stock

  Delivery Options

We ship to UK and Europe only, with free UK shipping available. Sorry we cannot ship outside Europe.

  Secure Payments

Shop with confidence at Sounds Heavenly. Pay safely by card or PayPal in our secure site.

  European Customers

Your local postal service may also charge Customs fees if you are outside UK. Contact us for details

Stereo RCA to B&O Beolab 4 and Beolab 4PC cable

Connect a Non-B&O music system to the Beolab 4 and 4PC "pyramid" speakers

This product is a high quality cable to allow you to connect a device with a stereo RCA output directly to your Beolab 4 or Beolab 4PC (ICEPower) active loudspeakers. NOTE: the output sockets must be Variable volume outputs and not fixed-level Line! Please see our "Minijack to Beolab 4" cables as an alternative.

One cable will allow a pair of Beolab 4 speakers to be connected to a device. This cable will fit the Beolab 4 and Beolab 4PC active louspeakers (ie. those with 3.5mm minijack line input sockets) - if you are in any doubt, please ask!  Each cable is supplied as a pair, with two plugs at the speaker end (ie. one plug goes to each speaker).  The two sides of the cable can be easily split apart to let you place the speakers as far apart as you need (for example with the 3m cable, you can place the speakers up to 6m apart with the music source in the middle).

Simply set the input switch on the back of your Beolab speakers to "Line" and plug the cable into the small Line socket on the back of each speaker. Turn the volume down on the input device when you switch it on, as Beolab speakers are VERY powerful!

  • Screened Pure-Crystal Oxygen-Free Copper cable with Sounds Heavenly signature Blue sheath
  • Signal conductors (x 2): 7 x 0.2mm PC-OFC copper
  • Screening conductor: 16 x 0.12mm PC-OFC copper
  • Shielding: Foil screen to reduce interference
  • Neutrik/Rean metal-bodied 7-pin DIN plug with gold plated pinss
  • Digital 24 carat Gold-Plated metal-bodied 3.5mm stereo jack plug

Did you know?
Simply set the input switch on the back of your Beolab speakers to "Line" and plug the cable into the small Line socket on the back of each speaker. Turn the volume down on the input device when you switch it on, as Beolab speakers are VERY powerful!
(M) 2rca/2trs lab 4

Specific References