• -16.66%
Minijack to Beolab Line In (using Powerlink sockets) - one cable for Two speakers
  • Minijack to Beolab Line In (using Powerlink sockets) - one cable for Two speakers

Minijack to Beolab Line In (using Powerlink sockets) - one cable for Two speakers

£22.99

Connect a TV, iPod/iPad/phone, or any other device with a 3.5mm headphone output socket directly to your BeoLab active speakers using the 8 pin Powerlink Line input sockets. NOT FOR BEOLAB 1, 2, 4, 5, 7-x, 10, 11, 2500, 4000 MK.1, 3000, 4500, 5000, 6000, 8000 OR PENTA SPEAKERS!

Cable Length in metres
Quantity
In Stock

  Delivery Options

We ship to UK and Europe only, with free UK shipping available. Sorry we cannot ship outside Europe.

  Secure Payments

Shop with confidence at Sounds Heavenly. Pay safely by card or PayPal in our secure site.

  European Customers

Your local postal service may also charge Customs fees if you are outside UK. Contact us for details

Beolab to Powerlink compatible Line input cable - Minijack connection

Connect external stereo audio devices directly to your B&O Beolab

*****

IMPORTANT NOTE: THIS CABLE IS NOT SUITABLE FOR 1, 2, 4, 5, 7-x, 10, 11, 2500, 4000 MK.1, 3000, 4500, 5000, 6000, 8000 OR PENTA SPEAKERS - PLEASE DO NOT BUY THIS CABLE IF YOU HAVE THESE SPEAKERS! 

PLEASE ASK US FOR ADVICE AND WE CAN FIND YOU THE CORRECT CABLE TO USE INSTEAD.

*****

This  high quality cable will allow you to connect a TV, iPod/iPad/iPhone, MP3 player, Mac/PC computer, or any other device with 3.5mm headphone output sockets directly to your Beolab active speakers using the Powerlink Line input sockets (see compatibility list below). One cable will allow two Beolab speakers to be connected.  Each cable is supplied as a pair, with two plugs at the speaker end (ie. one plug goes to each speaker).  The two sides of the cable can be easily split apart to let you place the speakers as far apart as you need (for example with the 3m cable, you can place the speakers up to 6m apart with the music source in the middle).

This cable is suitable for the following range of Bang and Olufsen Beolab active loudspeakers, as these systems have Powerlink DIN connections with a Line Input mode, instead of the previous RCA Line sockets.

Compatibility
This cable is suitable for the following range of Bang and Olufsen Beolab active loudspeakers:
  • Beolab 3
  • Beolab 4000 mark 2
  • Beolab 6002
  • Beolab 8002
  • Beolab 9
  • Beolab 12 (12-1 / 12-2 / 12-3) -- Please note, clip-on RJ45-PL adapters required!

Please note that this cable is NOT suitable for speakers that do not have a Line input option, eg. Beolab 2500 / 2 / 7 and 10! Instead see our "Powered Trigger Kit" for a solution for these speakers.

Alternative versions of this cable are also available that will fit other B&O Beolab speakers - if you are in any doubt, please ask! 

Turn the device volume down before you start playing music - Beolab speakers are VERY powerful!

Cable specifications:

  • Double-Screened, Pure-Crystal Oxygen-Free Copper cable with Sounds Heavenly signature Blue sheath
  • Signal conductors (x 2): 7 x 0.2mm PC-OFC copper
  • Screening conductors (x2): 16 x 0.12mm PC-OFC copper
  • 1 x stereo minijack plug, 24 carat Gold-Plated pins, metal-bodied
  • 2 x 7 pin DIN "Powerlink" compatible plugs, Neutrik/Rean, gold-plated pins

One of these cables will connect two speakers.

Did you know?
A popular use for this cable is for connecting a TV directly to a pair of Beolab 8002 speakers (uses the TV headphone socket for volume control).
(M) trs/2x7pd

Specific References