Can I use my Sonos Connect or Sonos ZP90 with Beolab speakers?

Questions and Answers, guides and FAQs › Category: SONOS questions › Can I use my Sonos Connect or Sonos ZP90 with Beolab speakers?

0 Vote Up Vote Down

steve Staff asked 10 years ago

Absolutely, many of our customers have done this!

Below is the cable you need to connect two Beolab speakers to a Sonos ZP90 or Sonos Connect:

Which cables do I need?

For Beolab speakers with RCA/ Phono Line input socket types:
Beolab Speaker Line In Cables or our Bespoke cables which are hand-built to order
Suitable for the following models:
- Beolab 1
- Beolab 5
- Beolab 3000
- Beolab 4000 mk.1
- Beolab 4500
- Beolab 5000
- Beolab 6000
- Beolab 8000
- Beolab Penta
- It may also be used with older BeoLab speakers that have displays (such as Beolab 3000, 4500, 5000 and Penta), but the displays will not function.

For Beolab speakers with 8 pin DIN Powerlink Line input socket types:
Beolab Speaker Line In Cables or our Bespoke cables which are hand-built to order
Suitable for the following models:
- Beolab 3
- Beolab 4000 mk 2
- Beolab 6002
- Beolab 8002
- Beolab 9
- Beolab 12 (12-1 / 12-2 / 12-3) — Please note, clip-on RJ45 adapters required!

NOTE: Beolab 2 Subwoofer or Centre Speaker bars

If you have a Beolab 2 subwoofer, or a Beolab 7-x/ Beolab 10 dedicated centre speakers, these each need a powered cable to generate the trigger signals that would normally be sent from a B&O television Powered Trigger Cable

Please set both speakers to “Line” mode using the small switch next to the input sockets.

If this information doesn’t fully answer your questions, please feel free to contact us, as our team of skilled engineers are always happy to help with any enquiries you may have!